Archive for May 13th, 2009

SheevaPlug initial bootlog

Wednesday, May 13th, 2009


__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** MARVELL BOARD: SHEEVA PLUG LE
U-Boot 1.1.4 (Mar 19 2009 - 16:06:59) Marvell version: 3.4.16
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CEE80
Soc: 88F6281 A0 (DDR2)
CPU running @ 1200Mhz L2 running @ 400Mhz
SysClock = 400Mhz , TClock = 200Mhz
DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000 size 256MB
DRAM CS[1] base 0x10000000 size 256MB
DRAM Total size 512MB 16bit width
Flash: 0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:512 MB
CPU : Marvell Feroceon (Rev 1)
Streaming disabled
Write allocate disabled
USB 0: host mode
PEX 0: interface detected no Link.
Net: egiga0 [PRIME], egiga1
Hit any key to stop autoboot: 3
NAND read: device 0 offset 0x100000, size 0x400000
Reading data from 0x100000 -- 0% complete.
Reading data from 0x10a000 -- 1% complete.
Reading data from 0x114000 -- 2% complete.
Reading data from 0x11e800 -- 3% complete.
Reading data from 0x128800 -- 4% complete.
Reading data from 0x133000 -- 5% complete.
Reading data from 0x13d000 -- 6% complete.
Reading data from 0x147800 -- 7% complete.
Reading data from 0x151800 -- 8% complete.
Reading data from 0x15c000 -- 9% complete.
Reading data from 0x166000 -- 10% complete.
Reading data from 0x170800 -- 11% complete.
Reading data from 0x17a800 -- 12% complete.
Reading data from 0x185000 -- 13% complete.
Reading data from 0x18f000 -- 14% complete.
Reading data from 0x199800 -- 15% complete.
Reading data from 0x1a3800 -- 16% complete.
Reading data from 0x1ae000 -- 17% complete.
Reading data from 0x1b8000 -- 18% complete.
Reading data from 0x1c2800 -- 19% complete.
Reading data from 0x1cc800 -- 20% complete.
Reading data from 0x1d7000 -- 21% complete.
Reading data from 0x1e1000 -- 22% complete.
Reading data from 0x1eb800 -- 23% complete.
Reading data from 0x1f5800 -- 24% complete.
Reading data from 0x1ff800 -- 25% complete.
Reading data from 0x20a000 -- 26% complete.
Reading data from 0x214000 -- 27% complete.
Reading data from 0x21e800 -- 28% complete.
Reading data from 0x228800 -- 29% complete.
Reading data from 0x233000 -- 30% complete.
Reading data from 0x23d000 -- 31% complete.
Reading data from 0x247800 -- 32% complete.
Reading data from 0x251800 -- 33% complete.
Reading data from 0x25c000 -- 34% complete.
Reading data from 0x266000 -- 35% complete.
Reading data from 0x270800 -- 36% complete.
Reading data from 0x27a800 -- 37% complete.
Reading data from 0x285000 -- 38% complete.
Reading data from 0x28f000 -- 39% complete.
Reading data from 0x299800 -- 40% complete.
Reading data from 0x2a3800 -- 41% complete.
Reading data from 0x2ae000 -- 42% complete.
Reading data from 0x2b8000 -- 43% complete.
Reading data from 0x2c2800 -- 44% complete.
Reading data from 0x2cc800 -- 45% complete.
Reading data from 0x2d7000 -- 46% complete.
Reading data from 0x2e1000 -- 47% complete.
Reading data from 0x2eb800 -- 48% complete.
Reading data from 0x2f5800 -- 49% complete.
Reading data from 0x2ff800 -- 50% complete.
Reading data from 0x30a000 -- 51% complete.
Reading data from 0x314000 -- 52% complete.
Reading data from 0x31e800 -- 53% complete.
Reading data from 0x328800 -- 54% complete.
Reading data from 0x333000 -- 55% complete.
Reading data from 0x33d000 -- 56% complete.
Reading data from 0x347800 -- 57% complete.
Reading data from 0x351800 -- 58% complete.
Reading data from 0x35c000 -- 59% complete.
Reading data from 0x366000 -- 60% complete.
Reading data from 0x370800 -- 61% complete.
Reading data from 0x37a800 -- 62% complete.
Reading data from 0x385000 -- 63% complete.
Reading data from 0x38f000 -- 64% complete.
Reading data from 0x399800 -- 65% complete.
Reading data from 0x3a3800 -- 66% complete.
Reading data from 0x3ae000 -- 67% complete.
Reading data from 0x3b8000 -- 68% complete.
Reading data from 0x3c2800 -- 69% complete.
Reading data from 0x3cc800 -- 70% complete.
Reading data from 0x3d7000 -- 71% complete.
Reading data from 0x3e1000 -- 72% complete.
Reading data from 0x3eb800 -- 73% complete.
Reading data from 0x3f5800 -- 74% complete.
Reading data from 0x3ff800 -- 75% complete.
Reading data from 0x40a000 -- 76% complete.
Reading data from 0x414000 -- 77% complete.
Reading data from 0x41e800 -- 78% complete.
Reading data from 0x428800 -- 79% complete.
Reading data from 0x433000 -- 80% complete.
Reading data from 0x43d000 -- 81% complete.
Reading data from 0x447800 -- 82% complete.
Reading data from 0x451800 -- 83% complete.
Reading data from 0x45c000 -- 84% complete.
Reading data from 0x466000 -- 85% complete.
Reading data from 0x470800 -- 86% complete.
Reading data from 0x47a800 -- 87% complete.
Reading data from 0x485000 -- 88% complete.
Reading data from 0x48f000 -- 89% complete.
Reading data from 0x499800 -- 90% complete.
Reading data from 0x4a3800 -- 91% complete.
Reading data from 0x4ae000 -- 92% complete.
Reading data from 0x4b8000 -- 93% complete.
Reading data from 0x4c2800 -- 94% complete.
Reading data from 0x4cc800 -- 95% complete.
Reading data from 0x4d7000 -- 96% complete.
Reading data from 0x4e1000 -- 97% complete.
Reading data from 0x4eb800 -- 98% complete.
Reading data from 0x4f5800 -- 99% complete.
Reading data from 0x4ff800 -- 100% complete.
4194304 bytes read: OK
## Booting image at 00800000 ...
Image Name: Linux-2.6.22.18
Created: 2009-03-19 9:18:16 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2106696 Bytes = 2 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux.................................................................................................................................... done, booting the kernel.
Linux version 2.6.22.18 (dhaval@devbox) (gcc version 4.2.1) #1 Thu Mar 19 14:46:22 IST 2009
CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053177
Machine: Feroceon-KW
Using UBoot passing parameters structure
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists. Total pages: 130048
Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs) rw root=/dev/mtdblock1 rw ip=10.4.50.4:10.4.50.5:10.4.50.5:255.255.255.0:DB88FXX81:eth0:none
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 256MB 256MB 0MB 0MB = 512MB total
Memory: 515456KB available (3864K code, 257K data, 104K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size 256MB
SDRAM_CS1 ....base 10000000, size 256MB
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e8000000, size 128MB
PEX0_IO ....base f2000000, size 1MB
INTER_REGS ....base f1000000, size 1MB
NFLASH_CS ....base fa000000, size 2MB
SPI_CS ....base f4000000, size 16MB
BOOT_ROM_CS ....no such
DEV_BOOTCS ....no such
CRYPT_ENG ....base f0000000, size 2MB
Marvell Development Board (LSP Version KW_LSP_4.2.7_patch2)-- SHEEVA PLUG Soc: 88F6281 A0 LE
Detected Tclk 200000000 and SysClk 400000000
MV Buttons Device Load
Marvell USB EHCI Host controller #0: c08b8600
PEX0 interface detected no Link.
PCI: bus0: Fast back to back transfers enabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: kw_clocksource clocksource has been installed.
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
RTC registered
Use the XOR engines (acceleration) for enhancing the following functions:
o RAID 5 Xor calculation
o kernel memcpy
o kenrel memzero
Number of XOR engines to use: 4
cesadev_init(c000c894)
mvCesaInit: sessions=640, queue=64, pSram=f0000000
Warning: TS unit is powered off.
MV Buttons Driver Load
NTFS driver 2.1.28 [Flags: R/O].
JFFS2 version 2.2. (NAND)
2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
Loading Marvell Ethernet Driver:
o Cached descriptors in DRAM
o DRAM SW cache-coherency
o Single RX Queue support - ETH_DEF_RXQ=0
o Single TX Queue support - ETH_DEF_TXQ=0
o TCP segmentation offload enabled
o Receive checksum offload enabled
o Transmit checksum offload enabled
o Network Fast Processing (Routing) supported
o Driver ERROR statistics enabled
o Driver INFO statistics enabled
o Proc tool API enabled
o Rx descripors: q0=128
o Tx descripors: q0=532
o Loading network interface(s):
o eth0, ifindex = 1, GbE port = 0
o eth1, ifindex = 2, GbE port = 1
mvFpRuleDb (dfd00000): 16384 entries, 65536 bytes
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Warning Sata is Powered Off
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 372 at 0x02e80000
Bad eraseblock 2158 at 0x10dc0000
Bad eraseblock 2419 at 0x12e60000
Bad eraseblock 2420 at 0x12e80000
Bad eraseblock 2439 at 0x130e0000
2 cmdlinepart partitions found on MTD device nand_mtd
Using command line partition definition
Creating 2 MTD partitions on "nand_mtd":
0x00100000-0x00500000 : "uImage"
0x00500000-0x20000000 : "rootfs"
ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
USB Universal Host Controller Interface driver v3.0
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
Linux telephony interface: v1.00
Marvell Telephony Driver:
mvBoardVoiceAssembleModeGet: TDM not supported(boardId=0x9)
assembly=-1,irq=-1
mp_check_config: Error, invalid voice assembley mode
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1 97 MB/s
raid6: int32x2 114 MB/s
raid6: int32x4 122 MB/s
raid6: int32x8 110 MB/s
raid6: using algorithm int32x4 (122 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: measuring checksumming speed
arm4regs : 1071.600 MB/sec
8regs : 754.800 MB/sec
32regs : 900.000 MB/sec
raid5: using function: arm4regs (1071.600 MB/sec)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
dm_crypt using the OCF package.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mvsdmmc: irq =28 start f1090000
mvsdmmc: no IRQ detect
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
mvCLAudioCodecRegGet: Error while reading register!
mvCLAudioCodecInit: Error - Invalid Cirrus Logic chip/rev ID!
Error - Cannot initialize audio decoder.at address =0xff<6>ALSA device list:
#0: Marvell mv88fx_snd ALSA driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new SD card at address d3cb
mmcblk0: mmc0:d3cb SD02G 1985024KiB
mmcblk0: p1
eth0: link down
eth0: started
IP-Config: Complete:
device=eth0, addr=10.4.50.4, mask=255.255.255.0, gw=10.4.50.5,
host=DB88FXX81, domain=, nis-domain=(none),
bootserver=10.4.50.5, rootserver=10.4.50.5, rootpath=
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
eth0: link up, half duplex, speed 10 Mbps
Empty flash at 0x087fd338 ends at 0x087fd800
Empty flash at 0x0f3869a0 ends at 0x0f387000
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 104K
* Setting preliminary keymap...
[80G
[74G[ OK ]
* Setting the system clock
The Hardware Clock does not contain a valid time, so we cannot set the System Time from it.
Unable to set system clock.
[33m*
[39;49m Unable to set System Clock to: Sun Jun 23 11:17:01 UTC 1963
* Starting basic networking...
[80G
[74G[ OK ]
* Starting kernel event manager...
[80G
[74G[ OK ]
* Loading hardware drivers...
[80G
[74G[ OK ]
* Setting the system clock
The Hardware Clock does not contain a valid time, so we cannot set the System Time from it.
Unable to set system clock.
[33m*
[39;49m Unable to set System Clock to: Sun Jun 23 11:17:04 UTC 1963
* Loading kernel modules...
[80G * Loading manual drivers...
[80G
[74G[ OK ]
* Setting kernel variables (/etc/sysctl.conf)...
[80G
[74G[ OK ]
* Setting kernel variables (/etc/sysctl.d/10-console-messages.conf)...
[80G
[74G[ OK ]
* Setting kernel variables (/etc/sysctl.d/10-network-security.conf)...
[80G
[74G[ OK ]
* Setting kernel variables (/etc/sysctl.d/10-process-security.conf)...
[80G error: "vm.mmap_min_addr" is an unknown key
[74G[
[31mfail
[39;49m]
* Setting kernel variables (/etc/sysctl.d/10-tcp-timestamps-workaround.conf)...
[80G
[74G[ OK ]
* Activating swap...
[80G
[74G[ OK ]
FATAL: Could not load /lib/modules/2.6.22.18/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.22.18/modules.dep: No such file or directory
* Starting early crypto disks...
[80G
[74G[ OK ]
FATAL: Could not load /lib/modules/2.6.22.18/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.22.18/modules.dep: No such file or directory
* Starting remaining crypto disks...
[80G
[74G[ OK ]
* Checking file systems...
[80G fsck 1.41.3 (12-Oct-2008)
[74G[ OK ]
* Mounting local filesystems...
[80G
[74G[ OK ]
* Activating swapfile swap...
[80G
[74G[ OK ]
* Configuring network interfaces...
[80G
[74G[ OK ]
* Setting up console font and keymap...
[80G
[74G[ OK ]
* Starting system log daemon...
[80G
Ubuntu jaunty (development branch) debian ttyS0
debian login:
[74G[ OK ]
* Starting kernel log daemon...
[80G
[74G[ OK ]
* Starting OpenBSD Secure Shell server sshd
[80G
[74G[ OK ]
* Starting periodic command scheduler crond
[80G
[74G[ OK ]
fat: exports duplicate symbol fat_add_entries (owned by kernel)
insmod: error inserting '/boot/fat.ko': -1 Invalid module format

SheevaPlug initial boot command

Wednesday, May 13th, 2009

From dmesg:
console=ttyS0,115200 mtdparts=nand_mtd:0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs) rw root=/dev/mtdblock1 rw ip=10.4.50.4:10.4.50.5:10.4.50.5:255.255.255.0:DB88FXX81:eth0:none

SheevaPlug initial Ubunut/Jaunty pre-loaded kernel

Wednesday, May 13th, 2009

Linux version 2.6.22.18 (dhaval@devbox) (gcc version 4.2.1) #1 Thu Mar 19 14:46:22 IST 2009

SheevaPlug /proc/cpuinfo

Wednesday, May 13th, 2009


$ cat /proc/cpuinfo
Processor : ARM926EJ-S rev 1 (v5l)
BogoMIPS : 1192.75
Features : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant : 0x2
CPU part : 0x131
CPU revision : 1
Cache type : write-back
Cache clean : cp15 c7 ops
Cache lockdown : format C
Cache format : Harvard
I size : 16384
I assoc : 4
I line length : 32
I sets : 128
D size : 16384
D assoc : 4
D line length : 32
D sets : 128

Hardware : Feroceon-KW
Revision : 0000
Serial : 0000000000000000

SheevaPlug lsusb

Wednesday, May 13th, 2009

Running Ubuntu/Jaunty

root@LordShiva:~# lsusb -v

Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22.18 ehci_hcd
iProduct 2 Marvell Orion EHCI
iSerial 1 ehci_marvell.70059
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 1
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Device Status: 0x0001
Self Powered
root@LordShiva:~#

SheevaPlug initial mount points

Wednesday, May 13th, 2009

Before updating Ubuntu


root@LordShiva:~# more df.orig
Filesystem Size Used Avail Use% Mounted on
rootfs 507M 148M 360M 30% /
tmpfs 252M 0 252M 0% /lib/init/rw
varrun 252M 40K 252M 1% /var/run
varlock 252M 0 252M 0% /var/lock
udev 252M 16K 252M 1% /dev
tmpfs 252M 0 252M 0% /dev/shm
tmpfs 252M 22M 231M 9% /var/cache/apt

SheevaPlug’s Initial dpkg list

Wednesday, May 13th, 2009

My SheevaPlug arrived with Ubuntu/Jaunty pre-installed on it.

Here is the initial dpkg list of packages:

Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name Version Description
+++-=================================-========================-============================================
ii adduser 3.110ubuntu2 add and remove users and groups
ii apt 0.7.19ubuntu1 Advanced front-end for dpkg
ii apt-utils 0.7.19ubuntu1 APT utility programs
ii base-files 5ubuntu1 Debian base system miscellaneous files
ii base-passwd 3.5.19 Debian base system master password and group
ii bash 3.2-4ubuntu1 The GNU Bourne Again SHell
ii belocs-locales-bin 2.4-4ubuntu2 tools for compiling locale data files
ii bsdutils 1:2.14-1ubuntu4 Basic utilities from 4.4BSD-Lite
ii busybox-initramfs 1:1.10.2-2ubuntu1 Standalone shell setup for initramfs
ii bzip2 1.0.5-1ubuntu1 high-quality block-sorting file compressor -
ii ca-certificates 20080809 Common CA certificates
ii console-setup 1.28ubuntu4 Set up the font and the keyboard on the cons
ii console-terminus 4.26-2.1 Fixed-width fonts for fast reading on the Li
ii coreutils 6.10-6ubuntu1 The GNU core utilities
ii cpio 2.9-14ubuntu1 GNU cpio -- a program to manage archives of
ii cron 3.0pl1-105ubuntu1 management of regular background processing
ii cryptsetup 2:1.0.6-7ubuntu1 configures encrypted block devices
ii dash 0.5.4-12ubuntu2 POSIX-compliant shell
ii debconf 1.5.24ubuntu2 Debian configuration management system
ii debconf-i18n 1.5.24ubuntu2 full internationalization support for debcon
ii debianutils 2.30ubuntu2 Miscellaneous utilities specific to Debian
ii dhcp3-client 3.1.1-5ubuntu1 DHCP client
ii dhcp3-common 3.1.1-5ubuntu1 common files used by all the dhcp3* packages
ii diff 2.8.1-12ubuntu1 File comparison utilities
ii dmsetup 2:1.02.27-4ubuntu3 The Linux Kernel Device Mapper userspace lib
ii dosfstools 3.0.1-1 utilities for making and checking MS-DOS FAT
ii dpkg 1.14.24ubuntu1 Debian package management system
ii e2fslibs 1.41.3-1ubuntu2 ext2 filesystem libraries
ii e2fsprogs 1.41.3-1ubuntu2 ext2/ext3/ext4 file system utilities
ii eject 2.1.5+deb1+cvs20081104-2 ejects CDs and operates CD-Changers under Li
ii file 4.26-2 Determines file type using "magic" numbers
ii findutils 4.4.0-2ubuntu3 utilities for finding files--find, xargs
ii gcc-4.3-base 4.3.2-2ubuntu12 The GNU Compiler Collection (base package)
ii gnupg 1.4.9-3ubuntu1 GNU privacy guard - a free PGP replacement
ii gpgv 1.4.9-3ubuntu1 GNU privacy guard - signature verification t
ii grep 2.5.3~dfsg-6ubuntu1 GNU grep, egrep and fgrep
ii gzip 1.3.12-6ubuntu2 The GNU compression utility
ii hashalot 0.3-5 Read and hash a passphrase
ii hostname 2.95 utility to set/show the host name or domain
ii ifupdown 0.6.8ubuntu15 high level tools to configure network interf
ii initramfs-tools 0.92bubuntu18 tools for generating an initramfs
ii initscripts 2.86.ds1-61ubuntu1 Scripts for initializing and shutting down t
ii iproute 20080725-2 networking and traffic control tools
ii iputils-ping 3:20071127-1 Tools to test the reachability of network ho
ii kbd 1.14.1-4ubuntu2 Linux console font and keytable utilities
ii klibc-utils 1.5.14-1~exp1ubuntu2 small utilities built with klibc for early b
ii klogd 1.5-5ubuntu2 Kernel Logging Daemon
ii language-pack-en 1:8.10+20081025 translation updates for language English
ii language-pack-en-base 1:8.10+20081025 translations for language English
ii laptop-detect 0.13.7ubuntu1 attempt to detect a laptop
ii less 418-1 Pager program similar to more
ii libacl1 2.2.47-2 Access control list shared library
ii libatm1 2.4.1-17.2 shared library for ATM (Asynchronous Transfe
ii libattr1 1:2.4.43-1 Extended attribute shared library
ii libblkid1 1.41.3-1ubuntu2 block device id library
ii libbz2-1.0 1.0.5-1ubuntu1 high-quality block-sorting file compressor l
ii libc6 2.9-0ubuntu7 GNU C Library: Shared libraries
ii libcap1 1:1.10-14build1 support for getting/setting POSIX.1e capabil
ii libcomerr2 1.41.3-1ubuntu2 common error description library
ii libcups2 1.3.9-11ubuntu1 Common UNIX Printing System(tm) - libs
ii libcurl3-gnutls 7.18.2-8ubuntu1 Multi-protocol file transfer library (GnuTLS
ii libdb4.2 4.2.52+dfsg-5 Berkeley v4.2 Database Libraries [runtime]
ii libdb4.6 4.6.21-12 Berkeley v4.6 Database Libraries [runtime]
ii libdb4.7 4.7.25-6ubuntu1 Berkeley v4.7 Database Libraries [runtime]
ii libdevmapper1.02.1 2:1.02.27-4ubuntu3 The Linux Kernel Device Mapper userspace lib
ii libedit2 2.11~20080614-1ubuntu1 BSD editline and history libraries
ii libfribidi0 0.10.9-1 Free Implementation of the Unicode BiDi algo
ii libgcc1 1:4.3.2-2ubuntu12 GCC support library
ii libgcrypt11 1.4.1-2ubuntu1 LGPL Crypto library - runtime library
ii libgnutls26 2.4.2-4 the GNU TLS library - runtime library
ii libgpg-error0 1.4-2ubuntu7 library for common error values and messages
ii libgpm2 1.20.4-3ubuntu1 General Purpose Mouse - shared library
ii libidn11 1.10-3 GNU libidn library, implementation of IETF I
ii libkeyutils1 1.2-9 Linux Key Management Utilities (library)
ii libklibc 1.5.14-1~exp1ubuntu2 minimal libc subset for use with initramfs
ii libkrb53 1.6.dfsg.4~beta1-4 MIT Kerberos runtime libraries
ii libldap-2.4-2 2.4.11-0ubuntu7 OpenLDAP libraries
ii liblocale-gettext-perl 1.05-4build1 Using libc functions for internationalizatio
ii liblockfile1 1.08-3 NFS-safe locking library, includes dotlockfi
ii liblzo2-2 2.03-1 data compression library
ii libmagic1 4.26-2 File type determination library using "magic
ii libncurses5 5.7+20081220-1ubuntu1 shared libraries for terminal handling
ii libncursesw5 5.7+20081220-1ubuntu1 shared libraries for terminal handling (wide
ii libnewt0.52 0.52.2-11.3ubuntu1 Not Erik's Windowing Toolkit - text mode win
ii libpam-modules 1.0.1-5ubuntu1 Pluggable Authentication Modules for PAM
ii libpam-runtime 1.0.1-5ubuntu1 Runtime support for the PAM library
ii libpam0g 1.0.1-5ubuntu1 Pluggable Authentication Modules library
ii libpcre3 7.8-2ubuntu1 Perl 5 Compatible Regular Expression Library
ii libpopt0 1.14-4 lib for parsing cmdline parameters
ii libreadline5 5.2-3build1 GNU readline and history libraries, run-time
ii libsasl2-2 2.1.22.dfsg1-23ubuntu2 Cyrus SASL - authentication abstraction libr
ii libsasl2-modules 2.1.22.dfsg1-23ubuntu2 Cyrus SASL - pluggable authentication module
ii libselinux1 2.0.65-5 SELinux shared libraries
ii libsepol1 2.0.30-2 Security Enhanced Linux policy library for c
ii libslang2 2.1.3-3ubuntu3 The S-Lang programming library - runtime ver
ii libsqlite3-0 3.5.9-6 SQLite 3 shared library
ii libss2 1.41.3-1ubuntu2 command-line interface parsing library
ii libssl0.9.8 0.9.8g-15ubuntu1 SSL shared libraries
ii libstdc++6 4.3.2-2ubuntu12 The GNU Standard C++ Library v3
ii libtalloc1 1.2.0~git20080616-1 hierarchical pool based memory allocator
ii libtasn1-3 1.5-1 Manage ASN.1 structures (runtime)
ii libtext-charwidth-perl 0.04-5build1 get display widths of characters on the term
ii libtext-iconv-perl 1.7-1build1 converts between character sets in Perl
ii libtext-wrapi18n-perl 0.06-6 internationalized substitute of Text::Wrap
ii libusb-0.1-4 2:0.1.12-13 userspace USB programming library
ii libuuid1 1.41.3-1ubuntu2 universally unique id library
ii libvolume-id1 136-4 volume identification library
ii libwbclient0 2:3.2.5-3ubuntu1 client library for interfacing with winbind
ii libwrap0 7.6.q-16 Wietse Venema's TCP wrappers library
ii libx11-6 2:1.1.5-2ubuntu2 X11 client-side library
ii libx11-data 2:1.1.5-2ubuntu2 X11 client-side library
ii libxau6 1:1.0.4-1 X11 authorisation library
ii libxcb-xlib0 1.1-1.1 X C Binding, Xlib/XCB interface library
ii libxcb1 1.1-1.1 X C Binding
ii libxdmcp6 1:1.0.2-3 X11 Display Manager Control Protocol library
rc libxext6 2:1.0.4-1 X11 miscellaneous extension library
rc libxmuu1 2:1.0.4-1 X11 miscellaneous micro-utility library
ii locales 2.7.9-5 common files for locale support
ii lockfile-progs 0.1.11ubuntu2 Programs for locking and unlocking files and
ii login 1:4.1.1-6ubuntu2 system login tools
ii logrotate 3.7.7-2ubuntu1 Log rotation utility
ii lsb-base 3.2-20ubuntu2 Linux Standard Base 3.2 init script function
ii lsb-release 3.2-20ubuntu2 Linux Standard Base version reporting utilit
ii lzma 4.43-14ubuntu1 Compression method of 7z format in 7-Zip pro
ii makedev 2.3.1-88 creates device files in /dev
ii mawk 1.3.3-13ubuntu1 a pattern scanning and text processing langu
ii mime-support 3.44-1 MIME files 'mime.types' & 'mailcap', and sup
ii mktemp 1.5-9 tool for creating temporary files
ii module-init-tools 3.3-pre11-4ubuntu18 tools for managing Linux kernel modules
ii mount 2.14-1ubuntu4 Tools for mounting and manipulating filesyst
ii mtd-tools 20080508-1ubuntu1 dummy package for transition purposes
ii mtd-utils 20080508-1ubuntu1 Memory Technology Device Utilities
ii nano 2.0.7-4 free Pico clone with some new features
ii ncurses-base 5.7+20081220-1ubuntu1 basic terminal type definitions
ii ncurses-bin 5.7+20081220-1ubuntu1 terminal-related programs and man pages
ii net-tools 1.60-21ubuntu1 The NET-3 networking toolkit
ii netbase 4.34ubuntu1 Basic TCP/IP networking system
ii netcat 1.10-38 TCP/IP swiss army knife -- transitional pack
ii netcat-traditional 1.10-38 TCP/IP swiss army knife
ii ntpdate 1:4.2.4p4+dfsg-7ubuntu3 client for setting system time from NTP serv
ii openssh-client 1:5.1p1-4ubuntu1 secure shell client, an rlogin/rsh/rcp repla
ii openssh-server 1:5.1p1-4ubuntu1 secure shell server, an rshd replacement
ii openssl 0.9.8g-15ubuntu1 Secure Socket Layer (SSL) binary and related
ii passwd 1:4.1.1-6ubuntu2 change and administer password and group dat
ii perl-base 5.10.0-19ubuntu1 minimal Perl system
ii procps 1:3.2.7-9ubuntu3 /proc file system utilities
ii python 2.5.2-3ubuntu1 An interactive high-level object-oriented la
ii python-minimal 2.5.2-3ubuntu1 A minimal subset of the Python language (def
ii python2.5 2.5.4-0ubuntu1 An interactive high-level object-oriented la
ii python2.5-minimal 2.5.4-0ubuntu1 A minimal subset of the Python language (ver
ii readline-common 5.2-3build1 GNU readline and history libraries, common f
ii samba 2:3.2.5-3ubuntu1 a LanManager-like file and printer server fo
ii samba-common 2:3.2.5-3ubuntu1 Samba common files used by both the server a
ii sed 4.1.5-8 The GNU sed stream editor
ii startup-tasks 0.3.9-8 definitions of essential tasks to run on sta
ii sudo 1.6.9p17-1ubuntu2 Provide limited super user privileges to spe
ii sysklogd 1.5-5ubuntu2 System Logging Daemon
ii system-services 0.3.9-8 definitions of essential system services
ii sysv-rc 2.86.ds1-61ubuntu1 System-V-like runlevel change mechanism
ii sysvinit-utils 2.86.ds1-61ubuntu1 System-V-like utilities
ii tar 1.20-1 GNU version of the tar archiving utility
ii tasksel 2.73ubuntu13 Tool for selecting tasks for installation on
ii tasksel-data 2.73ubuntu13 Official tasks used for installation of Debi
ii tcpd 7.6.q-16 Wietse Venema's TCP wrapper utilities
ii tzdata 2008i-3 time zone and daylight-saving time data
ii ubuntu-keyring 2008.03.04 GnuPG keys of the Ubuntu archive
ii ubuntu-minimal 1.131 Minimal core of Ubuntu
ii ucf 3.0011 Update Configuration File: preserve user cha
ii udev 136-4 rule-based device node and kernel event mana
ii unzip 5.52-12ubuntu1 De-archiver for .zip files
ii update-inetd 4.31 inetd configuration file updater
ii upstart 0.3.9-8 event-based init daemon
ii upstart-compat-sysv 0.3.9-8 compatibility for System-V-like init
ii upstart-logd 0.3.9-8 boot logging daemon
ii util-linux 2.14-1ubuntu4 Miscellaneous system utilities
ii uuid-runtime 1.41.3-1ubuntu2 universally unique id library
ii vim-common 2:7.2.079-1ubuntu1 Vi IMproved - Common files
ii vim-tiny 2:7.2.079-1ubuntu1 Vi IMproved - enhanced vi editor - compact v
ii whiptail 0.52.2-11.3ubuntu1 Displays user-friendly dialog boxes from she
rc x11-common 1:7.4~5ubuntu10 X Window System (X.Org) infrastructure
ii xkb-data 1.3-2ubuntu5 X Keyboard Extension (XKB) configuration dat
ii zlib1g 1:1.2.3.3.dfsg-12ubuntu1 compression library - runtime